Click each photo for an enlarged picture.

	50mm 6-pt Finder Bracket with flat mount for bolting onto the top of WO, AT, or any set of rings with two mounting 1/4" x 20 screws. Please state the exact hole spacing of the top or your rings and the width of the base and Ken will make you one to fit.
	Hinged 3-point guide scope rings ... New custom built item... 3-point rings with hinges ... Hinged 3-pt rings allow you to replace the telescope and retain the same optical allignment as when it was removed .... available in sizes 3.5" to 8" diameter. E-mail Ken your exact tube diameter, telescope type and brand...the rings are usually built about 1/2" to 3/4" larger than your tube diameter to allow adjustment. ...click here to see the ENLARGED IMAGE.
	HD Piggy Back Guide Scope Rings with ss mounting screws for Meade 12" SCT... Price: $135 plus $12 P&S in the 48 states.
	Standard Guide Scope Ring & Bar Unit for SCTs... (...Please provide your scopes mounting hole spacing for this item?)
	X-tra Heavy Duty Guide Scope Ring & Bar Unit for SCTs. (...Please provide your scopes mounting hole spacing for this item?)
	X-Tra Heavy Duty Guide Scope Rings ... (Meade 8 SCT version)
	X-tra HD 6-pt finder ring for Dobs and SCT.
	HD screw-on 3-pt Rings for mounting on top of your tube rings. (The 1/4" x 20 ss screw attaches with a flat screwdriver and turns inside the ring and spacer...your tube rings must have female 1/4" x 20 treads on top...see photo.) Available in 3.0" ID, 4.0" ID, or 5.0" ID sizes).
	Short Tube 80 finder ring set for large DOBs ...includes one 4.0" ID 6-point ring and two bases...please choose flat bas or curved base. E-mail Ken for price and give him your Dob scope size/type information.
	Designed for Newtonian rotating tubes, these are felt lined non-hinged side clamp rings with a retainer ring. The retainer is fixed against the top tube ring to prevent the tube from slide downwards during rotation.
	Black or White felt lined hinged rings available with finder bracket on one ring...e-mail Ken with your exact tube diameter for a price.
	Large 5.0" ID GSR with detachable base.
	Felt lined hinged rings with knurled knobs and 1/4" x 20 female treads in base.
	Ken's Largest set of HD hinged rings.
	Felt lined hinged rings in gloss white. These are also available in Gloss black lacquer.
	"Deluxe White Non-Hinged Rings" ...available with male or female 1/4" x 20 base treads.
	Felt lined non-hinged rings with intergrated piggyback 3-point rings ... 3-pt rings available in 3.0" ID, 4.0" ID, or 5.0" ID...e-mail Ken for Prices.
	Detachable 4.0" ID 3-pt rings with mounting base ...dovetail grove for precise allignment.
	New lightweight version of the ST80 bracket.
	Heavy Duty 3-pt Guide Scope Rings with curved base for Dobs...other bases available to fit other scopes on request... e-mail Ken ...
	Heavy Duty Pedistal 3-pt rings ("P") w/flat or curved base. ...sizes 3.0" ID, 4.0" ID, & 5.0" ID. e-mail Ken for prices.
	Large deluxe non-hinged rings (type C)
	Optional Deluxe White felt lined hinged rings (base available in standard female 1/4" x 20 or other types...photo shown with larger male treaded base and wing nut)
	Medium size NON-Hinged rings...very strong and leightweight... they can be constructed with a standard base as in the photo to the left ... or for extra charge, a special reinforced base as shown here ...(click here)... Heavy Duty Base .
	Small tube rings with knurled knobs.
	C-type type rings with knurled knobs.
	Red Dot Finder Ring Deluxe...mounts your red dot finder onto your OTA.
	Classic designed tube handles w/knurled knobs.
	Classic guide scope rings w/knurled knobs & integrated duel brass weight set.
	Classic style hinged rings with brass bolts, wing nuts, and knyrled aluminum knobs with brass treads.
	Finder ring assembly with deluxe knyrled knob and 8 X 50mm finder bracket.
	New Design Camera mounting Ring ...mounts any camera with 1/4" X 20tpi mounting treads.

	Tube Weight Ring... this one fits the Celestron CR150 refractor but we can make one for almost any size tube (please verify your exact tube diameter and/or circumference)...uses 1" bore weights (not included)... Designed as an economy way to balance the tube of the Celestron 150mm F8 refractors and other scopes.
	Dovetail Bar Sliding Weight Assembly ... this item slides onto your dovetail bar to help balance heavy eyepieces, 2" diagonals, cameras etc... uses Walmart 2.5 lb type weights...will support one or two weights. Ken can supply you with a longer custom built extra long dovetail bar (6" to 15" long) to allow more movement... fits all 1.8" wide CG5 type dovetail bars...please state your exact bar width/diameter for a more precise fit.
	Extended GP/CG5 Dovetail Bar & 4-lb Dovetail SlidingWeight Assembly ...includes 13.5" dovetail bar and sliding weight. E-mail Ken for price...we accept Visa & Mastercard thru www.PayPal.com.
	This is Ken's new "Economy Balancing Weight Unit for Dobs and SCTs". The iron weight is available in either 2-pound or 3.5 pound ...your choice. E-mail Ken with your address and length of slide bar required and Ken will give you a price plus shipping.
	Heavy Duty Balancing Weight bracket for Dobs uses "Walmart" 2.5 or 5lb iron weights sold in the weight lifting dept. Shipping price of these weights would be more than they cost ...so I offer only the bracket... The weights (not included) can be purchased at your local Walmart Dept Store... 2.5lbs iron weight listed for $3 each.
	Efficient balancing unit with slotted base for easy mounting on top of your tube rings or dob base.
	Brass weight set with slotted base for mounting on top of tube rings.

Almost every serious amateur astronomer knows the benefit of having a fixed observatory of some sort - it saves a vast amount of time and effort during every observing session - and this book provides the necessary help. More Small Astronomical Observatories details the methods and techniques employed by non-professional astronomers from all over the world, providing a wonderful resource for anyone wishing to build a small observatory of almost any kind. It's a fun read, too. Not only that, but a free PC-format CD-ROM is included, containing the entire first book (now out of print) - you get two books for the price of one!

For More Items Warp To The Accessories Page

Please email me for information: sales@kendauzat.net

Journey Back to Ken's Home Page